Doorbook.
Set it up once

Bringing an existing building in

You do not need months of history to start. Doorbook needs a starting figure for each meter, and the first round you walk can supply it.

4 min read Updated 2026-11-16

This is the path for a landlord moving off paper or a spreadsheet partway through the year. Nothing about Doorbook requires you to have been using it since January.

Where the first bill measures from

Rooms you create from room-type lines need no reading at setup. The first reading you take on each meter becomes its baseline, so that month's bill charges rent and the other fixed charges but no electricity or water units. Usage is billed from the next month on.

If you would rather bill this month's usage as well, give each room its last reading before you start — the figure on your paper sheet or spreadsheet — as its opening reading. Edit the room to enter it, or add the room on its own with Add room, which asks for both readings. The first bill then measures from that figure.

Rent, rates and defaults

Rent, internet and per-unit electricity and water rates go in per room. The defaults you set during onboarding fill each new room in for you, and anything unusual is overridden on the room itself.

Unpaid balances you are already owed

There is no field for an opening balance. Put the amount on the first bill as a positive adjustment with a note saying what it is — last month's rent, an unpaid water charge, whatever the tenant still owes. The adjustment is cleared when the cycle closes, so it is charged exactly once.

What you cannot back-fill

Past months cannot be entered retroactively. History accumulates from the first cycle you close in Doorbook, and the analytics are honest about only knowing what they saw.

Read next